10寸抽风机模具 塑料百叶窗式排气扇模具 黄岩最具影响力的模具厂要确保模具的成本，成本的管控是与质量和交期成正比例关系的，模具质量一次性做到位，少有修改，交期缩短，这样企业制造成本就低，赚取利润就很高，在市场订单承接过程中就具有独特的竞争优势。反之，企业不仅无优势，还会因此不赚钱甚至赔钱。选择我们只会让你放心，没有什么比品质更重要，我们所追求的就是达到您的满意，做出价格合理品质有保证的模具。别人几十万的模具我们定价才几万块，不是我们东西做的不好，而是我们把不必要的成本都去掉，只是想给您最实惠的价格。To ensure that the cost of the mould, the cost control is a direct proportion with the quality and delivery, quality of mould one-time do a little modification, to shorten the delivery date, so that enterprises manufacturing cost is low, the profit is very high, in the process of market orders to undertake it has a unique competitive advantage.On the other hand, the enterprise not only have no advantage, so don't make money or lose money.Choose us will only make you rest assured that nothing is more important than quality, what we are after is to your satisfaction, make price reasonable quality guaranteed mold.Others hundreds of thousands of mould we pricing tens of thousands of pieces, not the things we do is not good, but we remove the unnecessary cost, just want to give you the most affordable price.
抽风机模具制作步骤：1、我们会根据样品的形状先考虑是否符合注塑模具制作原理
2、由您寄来样品，由我们这里有丰富经验的设计师画模具结构设计图，如果产品有所改动需要先根据您的要求画产品图
3、抽风机模具投入生产：1.采购钢材，我们有专业的供货商，合作多年一直保证钢材质量
2、铜公：前模铜公、后模铜公、分模线清角铜公；
线切割：镶件分模线、铜公、斜顶枕位；
电脑锣：精锣分模线、精锣后模模芯；
电火花：前模粗、铜公、公模线清角、后模骨位、 枕位；
钻孔、针孔、顶针；
3、待抽风机模具完全组装完成，我们首先要做的就是试模，一般第一次试模其实是可以投入生产的，只不过我们想把模具做的更完美些，光泽度更好些，会选择做一些细节修复，待再次试模直到完全ok会把试模产品寄给客户，客户完全满意之后将会来我们厂亲自试模，认可后我们将模具木架包装托运到客户指定地点，
4、在客户使用抽风机模具期间如果有任何问题我们都会派模具师傅把模具修好，或者寄过来修。
这里所有的图片都是实物拍摄，手机拍的光线不是很好，未处理照片
about mould quotation: need customer 3 d drawing or send the samples to us, offer is more accurate, if you need to discuss the changes can be directly to the factory, we will according to the size of the mold, the steel used, complexity, whether to need to add the slider, cold runner or hot runner to offer, of course the price of our side is very reliable.
Mold production steps: 1, we will according to the shape of the sample before considering whether to conform to the principle of injection mold production
2, up to you to send samples, from we have rich experience of the designer did die structure design, if the product change need to draw products according to your requirement
3, mold production: 1. Procurement of steel, we have a professional suppliers, cooperation for many years, always ensure the quality of steel
Before 2, copper: copper mold, copper mold, parting line after the qing Angle copper male;
Line: insert parting line, copper public and inclined top pillow;
Computer gongs: jing gong after parting line, jing gong die mold core;
Before edm: copper mould coarse, male, the male line Angle, after the mould rib, pillow;
Drilling, pinhole, thimble;
3, to die completely assembled, the first thing we have to do is test, general test for the first time can be put into production, actually we just want to do the mould to be more perfect, glossiness is better, will choose to do some details to repair, to test again until completely ok will send the test products to customers, customers fully satisfied after will come to our factory to personally test and after approval we will check mold wooden packaging to the customer designated locations,
4, if you have any questions during the customers to use the mould we all send master mold has repaired the mould, or send me.
Here all of the pictures are taken in kind, mobile phone of the light is not very good, did not deal with photos